TAT 210 Series
High Capacity, High Vacuum Pumps

This largest TAT pump head - capable of flow rates to 1050 gallons per hour with 1 1/4" ID tubing - pushes the upper limits of tubing pump technology. It is a special-purpose, low-speed pump offer only for the occasional application that demands a flow rate greater than the 438 gallons per hour obtainable from a series 110 pump. All series 210 pumps are equipped with an oil-filled 17/1 ratio transmission.

Basic flow data:   3/4" ID tubing -- .246 liter/rev..   1" ID tubing -- .435 liter/rev.   1 1/4" ID tubing -- .662 liter/rev.

Click here to view this pump from all sides.

---

TAT 210 Series Pumps

• Model 210-22D - Complete 100 RPM pump, belt driven by a 1 HP, totally enclosed, fan cooled, 115V, single phase, 60 Hz motor.
• Model 210-42D - Complete 5-100 RPM pump, belt driven by a 1 HP, variable speed, 115 V, single phase, 60 Hz motor.
• Model 210-82D - Complete 30-100 RPM pump, belt driven by a 2 HP air motor supplied with pressure regulator and gague.

Call for more information on a rental plan for these pumps.

---