Low Cost Variable - Speed Pump

The variable speed drive consists of a pump and motor mounted on a base coupled through, either a 21/1 or 9/1, gear train housed in the base. The solid state controls feature a single turn potentiometer and an On/Off/Reverse switch on the control box. The pump comes complete with an 8 foot power cord with a molded grounded plug for 115 Volt, 60 Hz operation.

TAT MODEL 410-2-6B1CERS6 VARIABLE SPEED PUMP
WITH 21/1 GEAR TRAIN
Model No. Motor Type
RPM 		Pump RPM MAXIMUM LIFT AND FLOW RATE BY TUBING SIZE
1/8" ID 1/4" ID 3/8" ID 1/2" ID
MAXIMUM SUCTION LIFT IN FEET 28 FT 28 FT 21 FT 15 FT
410-2-6B1CERS6
was 410-66RZ 		115 VAC
1800 		85 0.2 - 2.8 GPH
14 - 177 ccm 		0.7 - 8.1 GPH
45 - 511 ccm 		1.4 - 14.9 GPH
88 - 940 ccm 		2.3 - 24.3 GPH
144 - 1533 ccm


410-66RZ

 

 

410-2-6B1CERS6
was pump 410-66RZ
Dimension Drawing
Exploded Part Diagram with Replacement Part Pricing


TAT MODEL 410-2-6B1CERS8 VARIABLE SPEED PUMP
WITH 9/1 GEAR TRAIN
Model No. Motor Type
RPM 		Pump RPM MAXIMUM LIFT AND FLOW RATE BY TUBING SIZE
1/4" ID 3/8" ID 1/2" ID
MAXIMUM SUCTION LIFT IN FEET 28 FT 21 FT 15 FT
410-2-6B1CERS8
was 410-68RZ 		115 VAC
1800 		200 1.4 - 19.0 GPH
90 - 1199 ccm 		2.8 - 34.9 GPH
176 - 2202 ccm 		4.6 - 57.0 GPH
288 - 3596 ccm


HOW TO ORDER THE RIGHT TAT HIGH CAPACITY PUMP TO MEET YOUR SPECIFIC PUMPING NEEDS...
  • Specify Model Number: 410-#1Z, 410-66Q, 410-66RZ, etc.
  • Specify Tubing Material: Neoprene, Hypalon, etc.
  • NOTE: Choose proper Tubing material for fluid to be pumped using Chemical Resistance Chart.
  • Specify Motor Type for Fixed- or Variable-Speed Electric Pumps by substituting 1, 2, or 3 for # sign (1 for open frame motor, 2 for totally enclosed motor, 3 for explosion-proof motor).
  • All Series 410 Pumps supplied with roller assembly and tube retainers for tubing diameter requested.

Most Standard TAT Pumps Shipped Same Day Order Received.